How to fix charging port on Amazon Fire tablet

Kindle fire won’t charge loose port. The Kindle Fire is ideal for those looking for a low-cost tablet. The Kindle Fire is still a terrific value for money, even if it doesn’t have all of the latest features. Depending on the model, this tablet will set you back roughly a hundred bucks.

Table of Contents Show

Packing the port
Adjust the port with pliers
Kindle fire won’t charge loose port (Repair)

You can read books, use other programs, and a lot more.

However, many are complaining on internet forums that their Kindle Fire won’t charge due to a loose port. Now, if your Kindle Fire is experiencing the same issue, let us walk you through several port-related solutions.

Fixing Kindle charging issues

Frequent reconnection can cause the charging port’s circuitry to loosen over time, and in extreme circumstances, detach completely.

This can also happen when using the Fire for an extended period, as the port was not built to take the stress of having the cable yanked out regularly.

When you’re ready to connect the cable, make sure it’s well seated. Gently move it around to see if there is any evidence of a loose connector. If this is the case, you can try to charge your Fire by placing it on a flat surface. If this remedy charges your Amazon Fire tablet, you know it’s the port that’s preventing it from charging.

Apart from these issues, we will discuss other problems and their solutions.

Kindle fire Faulty adapter

It’s not always the port connected to your Kindle fire is loose, it can sometimes be the port connected to the adapter.

It’s really simple to discover why the charging adapter isn’t working. Therefore:

Rather than using the charger, connect the cable to a computer or other USB power source and check if your Fire will charge.
If it does, the issue was with the charger.
It’s vital to remember that not all chargers are made equal; they differ in terms of amperage and, in certain cases, voltage.
Next, we’ll put the USB cable to the test. Nevertheless, all micro-USB cables are essentially the same, so borrow one from a different device or a friend and see if swapping cables can cause your Fire to charge.

This is how you will know that the issue was with your cable, and you should replace it.

Packing the port

Even though it may appear impractical, some customers have been able to repair the loose charging port with a little piece of tape.

To limit the amount of space available for the charging cable, users taped a thin strip of the tape inside the port. The port became tighter as a result of the tape, and the charging cable no longer fell out.

However, you must exercise extreme caution because the connector pins within the port may be damaged. Also, ensure the tape is adhered to the side of the port and does not hide any of the connecting pins.

But unless you don’t want to replace the port, simply follow these steps:

Place the Kindle Fire on a level surface and try to orient the USB cord to charge it properly.
The Kindle Fire will continue to charge as long as you don’t move it.
After the battery is fully charged, you can use it as usual.

Finding the proper angle might be time-consuming. However, for those people who didn’t want to buy a new Kindle Fire and already knew how to configure the USB angle to charge the tablet, this hack worked.

Adjust the port with pliers

By gently squeezing the cable end with the pliers, you can thicken it in one dimension or the other.

In such a case, you can squeeze the cable end gently along the top and bottom to make it wider, then squeeze it gently along the sides to make it fatter.

You may be able to adjust the fit and get the cable to reconnect with the port and work again by doing so.

This can be one of the solutions but we recommend you do not try this method on your brand-new charging cable because it might go wasted if the procedure is not followed properly.

Guarantee claim

Many consumers have experienced this issue, and as long as your Kindle Fire’s warranty is still active, you should have no trouble acquiring a replacement.

You can inquire about the status of your warranty by contacting the retailer where you purchased the gadget.

It is advised that you should not attempt to repair the item yourself and instead purchase a replacement. In most situations, opening the equipment voids the warranty, and you will not be entitled to a replacement device from your providers.

Kindle fire won’t charge loose port (Repair)

Related Guides

The Kindle Fire is a great way to engross yourself in a good book or enjoy a nice game of candy crush without the need of a big book or a heavy computer. However, with all electronic devices, they can break down. In the case of the Kindle Fire, the USB port used for charging can become dislodged or wear out from normal use after the warranty is up. Buying a new one or paying to have it fixed can become costly. These instructions will help fix this small problem. The process takes around 45 minutes to an hour and half. This repair does require the skills to solder small parts back together and should not be attempted by children.

The materials I used:

#00 Philips Head Screw Driver

Plastic Pry Tool

60/40 Rosin Core Solder

30 Watt Soldering Iron with Fine Point Tip

Magnifying Glass Station

Solder Vacuum

New USB Port (I bought mine on Amazon)

Optional Materials:

Sharp Knife or Other Sharp Blade

Plastic Container

1. Starting at the top of the Kindle between the speakers, wedge the plastic pry tool into the crack between the two halves.

TIP: If you are having trouble getting the pry tool into the crack you can use something sharp like a knife or a small flat head screw driver to get started. However be careful not to damage the plastic case.

WARNING: If you are going to use a knife or something sharp make sure to be careful not to cut yourself.

2. Gently start to pry the two halves apart slowly running the pry tool along the edge as each section is broken loose.

CAUTION: The plastic tabs connecting the two halves together are brittle and can break if too much force is applied so be gentle.

1. Lift up the tape covering the speaker cable.

2. Gently remove the speaker cable from the connection.

3. Lift up the display data cable to disconnect it.

4. Lift up the antennae cable to disconnect it.

5. Lift open the power button connector and pull the ribbon away.

6. Lift up the light sensor connector and pull the ribbon out.

7. Remove the two screws holding the touch-screen controller down with the Phillips screw driver.

8. Lift up the touch-screen connector and remove the ribbon.

TIP: These connectors are small so it may be easier to use the pry tool to lift up the connector and cables.

CAUTION: The wires are fragile so make sure you gently pull the ribbons and cables out to prevent breaking them.

1. Remove the six screws holding the motherboard in place with the Philips screw driver.

2. Make sure the cable that you removed are out of the way so they do not get caught on the motherboard.

3. Gently pull the motherboard away from the frame.

TIP: The motherboard is also held down by adhesive tape on the bottom so you can use the pry tool to work the motherboard back and for to break the seal on the glue.

TIP: The screws are very small. Placing them in a small cup will prevent losing them.

NOTE: For these next two steps I used a magnifying glass stand to help me see and work with the small parts.

1. If the USB port has come off completely make sure all of the connection points are cleaned.

Heat up the excess solder on the points with the soldering iron.
When it is melted use the solder vacuum to suck up the excess solder.

WARNING/CAUTION: The soldering iron gets very hot so be careful not burn yourself or touch it to areas on the motherboard you are not going to be soldering that it can damage.

2. If the USB port is still partially or fully attached, heat up the points with the soldering iron and vacuum the solder away with the soldering vacuum until the part is fully detached.

3. Place a little amount of new solder on the points that the new port will be placed.

Place a little amount of solder on the iron.
Touch the iron to the points until the solder comes off.

CAUTION: Make sure that the new solder does not connect any of the points together or else the motherboard might short circuit and cause damage.

1. Place the new USB port into the cleaned spot.

2. Solder the posts that hold the port to the board.

Place solder on the iron and heat up the post until the solder attaches to the posts.
Once the posts are soldered push down on the top of the port while heating up the solder to make sure the port is adequately in place.
Turn the board over and fill in the holes on the bottom of the side.

NOTE: Make sure that the five pins are pushed down and touch the board before soldering them down.

3. Solder the five pins to the board.

NOTE: This step is really tricky since the pins are very small. Make sure to use just a small amount of solder and make sure the solder does not bridge any of the points together. If they do make sure to clean the area before finishing.

1. Make sure all the ribbons and cables are out of the way before putting the motherboard back into place.

2. Follow steps 2 and 3 in reverse order to replace and reconnect the motherboard.

1. Line up the two halves of the case.

2. Gently press the two halves back together making sure the clips click back into place.

Congratulations, you have successfully repaired your Kindle Fire! The soldering is the hardest part, requiring practice and a steady hand. However, with the new USB port and a more secure soldering job, your kindle will now last last longer. Not only will it last longer but it cost a lot less than having someone else repair it or buying a new one. Now you can curl up on your favorite chair and begin a new adventure.