Sometimes in Windows, we plug speakers or headphones in 3.5 mm jack but did not get any sound. This error is quite annoying because sometimes we just want to enjoy music on speakers but this error does not let play audio on speakers. Show
ADVERTISEMENT But don’t worry we got you covered. Here are some methods that will solve your issue regarding speakers and headphone. Note: – Please plug in your audio device into another audio jack of a different device. If the problem still persists then your hardware may be the reason behind this. If this is not the case, then just follow the procedures given below. Table of Contents
Solution 1: Disable and Enable Sound CardSTEP 1 – Right Click on Windows button and Select Device Manager. STEP 2 – It will open Device Manager window, locate Sound, Video and game controllers, double click on it to expand it. ADVERTISEMENT Step 3 – Now, right click on your sound card and disable it.
Step 4 – Restart your PC. Step 5 – Now, go back to same place and right click and enable the sound card again. Solution 2 – Disable front panel jack detection in Realtek HD audio managerNote: -You must have realtek HD audio manager installed on your system. 1. Open Realtek HD Audio Manager 2. click on the Settings (wrench style icon). 3. Toggle the slider Off on Disable front panel jack detection to disable the headphone jack. Method 3 – With command prompt1 – Open command prompt as administrator. 2 – Now, type the following command given below and hit enter. net localgroup Administrators /add networkservice 3 – Next type the command given below in command prompt and hit enter. net localgroup Administrators /add localservice 4. Now, close the command prompt window. 5 – Restart your PC. Solution 4 – Uninstall the audio driverSTEP 1 – Right Click on Windows button and Select Device Manager. STEP 2 – It will open Device Manager window, locate Sound, Video and game controllers, double click on it to expand it.
STEP 3 – Select your audio device (i.e. Realtek High Definition Audio) from the list and open Properties from Right Click menu.
STEP 4 – Head over to the driver tab and Click Uninstall.
Reboot your device after finishing the process. It will install your audio driver again and solve your problem. If this method did not work for you try updating your audio driver.
Solution 5 – Update the Audio DriverSpeakers/headphones not working issue might be due to the outdated drivers in your computer. This issue can be resolved by updating audio drivers. To update your Audio driver follow this simple process. Repeat first three steps from above method and then follow below steps. STEP 4 – In the driver tab, click on the Update Driver button.
STEP 5 – Select Browse my computer for driver software option.
STEP 6 – Select Let me pick from a list of device drivers on my computer option.
ADVERTISEMENT
STEP 7 – Select Device Driver (i.e. High Definition Audio) and click Next. It will give you a warning about updating driver, Click on yes and it will begin updating your driver. No speakers or headphones problem might occur in Windows mainly due to bad sound driver or corrupt system files. The drivers’ issues range from an incompatible driver (after an update) to a corrupt sound driver. The issue arises (mainly after an OS or driver update) when there is no sound output from your system and when you check on the volume icon in the system tray which sometimes shows a red cross, you are shown no speakers or headphones message. The issue is not limited to a particular brand of sound cards or PCs. No Speakers or Headphones are Plugged InThere may be many reasons for which your system’s speakers or headphones might not work but the following can be easily considered as the main factors to cause the sound issue:
1. Roll Back the Sound Driver in the Device ManagerIf the updated system’s sound driver is not compatible with your PC, then that could result in the issue at hand as the OS may fail to load the incompatible driver. In such a case, rolling back the system’s sound driver may clear the audio issue. Before moving on, check if trying another cable for the speakers (if the issue is occurring on the external speakers) clears the error. Also, check if your system’s audio works fine when booted through another OS USB like a live Ubuntu USB (if possible).
2. Update the PC’s Windows to the Latest BuildThe system may show no speakers or headphones issue if the PC’s OS is outdated as it can make the OS incompatible with other essential modules (like the sound driver) and as a result, the OS fails to load the driver. Here, updating the PC’s Windows to the latest build may solve the sound problem.
3. Try the Windows Built-in TroubleshooterA temporary glitch in the OS’s modules could result in the non-working of speakers or headphones and cause the issue at hand. In such a case, trying the Windows Built-in troubleshooter may solve the problem.
4. Set the Speakers or Headphones as the Default Output DeviceIf the speakers or headphones are not set as the default output device on your system, then the system might try to route the audio signal to the default output device (that is not present), thus causing the issue. In this scenario, setting the speakers or headphones as the default output device of the system may solve the problem.
5. Disable the Front Jack Detection in the OEM’s Utility (If Applicable)If an OEM utility like Realtek HD Audio Manager is overriding Windows’ capability to detect a headphone or speaker to the system, then that could result in the no speakers or headphones issue at hand. In this case, disabling the Front Jack Detection in the OEM utility may clear the problem. For elucidation, we will discuss the process of disabling the Front Jack Detection in the Realtek HD Audio Manager.
If the issue persists, check if inserting the speakers or headphones into another port or jack resolves the issue. If the system has only one jack, check if re-plugging the audio device (make sure the connector is properly seated, you may wiggle the connector a bit) clears the error. 6. Disable and Enable the System’s Audio DeviceA temporary glitch in the system’s modules could stop the audio device from working and cause the issue at hand. Here, disabling and enabling the system’s audio device may solve the problem.
7. Update the System’s Drivers to the Latest BuildsYou may also encounter the sound issue under discussion if the system’s drivers are outdated as the sound driver becomes incompatible with the OS and fails to load with the OS. In this context, updating the system’s drivers (especially, the sound driver) to the latest build may solve the problem.
8. Perform the Clean Boot of the System and Uninstall Conflicting ApplicationsThe sound problem under discussion may arise if another application on the system is interfering with the system’s sound driver and not letting it execute. In this scenario, performing a clean boot of the system and uninstalling the conflicting application may solve the problem.
The Realtek Audio Manager is a reported utility to cause the problem and if you have installed it (or a similar utility), then check if uninstalling it resolves the issue. For illustration, we will discuss the process of uninstalling the Realtek Audio Manager.
9. Enable the System Services Through the Command PromptIf the services essential for the operation of the audio device are not enabled, then that could result in the problem at hand. In this case, enabling the system services through the Command Prompt may solve the problem.
10. Update the PC’s BIOS to the Latest BuildYou may encounter the speakers or headphones issue if the PC’s BIOS is outdated as it can make the different system devices incompatible with each other. In this context, updating the PC’s BIOS to the latest build may clear the audio issue. Warning: Advance at your own risk and with extreme caution as editing the PC’s BIOS settings or updating the BIOS is a skilled job. If not done properly or something goes wrong (like a sudden power failure during the BIOS update process), you may brick your system and the data may be lost.
11. Reinstall the Sound DriverThe no speaker or headphones issue might emerge if the system’s sound driver is corrupt and has become incompatible with the OS. In this case, reinstalling the system’s sound driver may solve the problem.
12. Edit the System’s Registry to Allow the User Full Control Over the Audio ServiceIf none of the above worked for you, then editing the system’s registry to allow the user full control over the audio service (especially, on a domain-joined computer) may solve the problem. Before proceeding, do not forget to backup your system’s registry (just in case…). Warning: Proceed at your own risk and with utmost care as editing your system’s registry is a skillful job. If not done properly, you may cause undying damage to the system, OS, and, data.
13. Remove the Conflicting Windows UpdateIf the PC’s latest Windows Update is conflicting with your system’s sound hardware, then that could also result in the audio issue under discussion. Here, removing the conflicting Windows update may solve the problem.
14. Perform an In-Place Upgrade of the SystemThe speakers or headphones issue might also occur if the system’s Windows is corrupt and due to this corruption, the OS fails to load the sound driver. Here, performing an In-place upgrade of the system may solve the problem. Before proceeding, do not forget to back up the system and create a restore point. Also, ensure the system drive has enough free space to complete the installation (for 64-bit: 32 GB and 32-bit: 20GB). If the system gets interrupted during the upgrade process, then you may remove any 3rd party security application (at your own risk) and disable the BIOS’s Secure Boot.
If the issue persists, then check if performing a system restore resolves the audio issue. If that did not work or is not an option, then you may reset your PC to the factory defaults or perform a clean installation of Windows on your system to clear the sound problem. If that did not work, then the sound card might be faulty and you may need a new sound card. Why is my PC saying my headphones aren't plugged in?Your computer not recognizing your headphones is a fairly common issue in Windows 10 PCs. It could be caused by a corrupt or outdated driver, faulty USB ports (if your headset uses USB), an error in the connection (in case of Bluetooth, for example), or an issue with the headphones themselves.
Why does my computer say no speakers?If your computer suddenly has no sound, it might be due to the following reasons. For instance, the correct device may not be in use by Windows for speaker output. The external speakers may not be powered on, and the audio might be muted.
How do I get Windows 10 to recognize my speakers?Here's how: In the search box on the taskbar, type control panel, then select it from the results. Select Hardware and Sound from the Control Panel, and then select Sound. On the Playback tab, select and hold (or right-click) the listing for your audio device, select Set as Default Device, and then select OK.
Why is my laptop not detecting my speakers?Change Your Audio Device
In Windows 10, right-click the speaker icon in the taskbar and choose Sounds. Select the Playback tab and select the device you want to use. If you don't see it, try right-clicking and checking Show Disabled Devices. Select the output device you want and click the Set Default button.
|