How to fix bent Chromebook charger

You might found your charger adapter prongs bent a little after it fell quite harshly, or perhaps you receive a faulty product from shipping.

With that shape, the plug is impossible to fit into the power outlet. One prong would prevent the other to go inside the hole.

Luckily, you can straighten the prong with a simple tool; pliers. Also, prongs are mostly made of nickel or brass — materials that can easily shape whatever you like.

How to fix bent plug prongs

Time Needed : 5 minutes

In this tutorial, we will straighten plug prongs using pliers correctly without damaging it. This method applies to various electronic devices and plug types.

1. Examine the prongs to see where the bent is pointed. That way, you know the direction to straighten it.
2. Take the pliers and slowly apply pressure to the opposite direction of bent until it looks normal again. Despite brass/nickel is considered as a “soft” material, you need to be gentle to avoid unwanted damage.
3. Now the prong has straightened. It does not have to be perfect, at least straight enough to fit into the socket holes.

In the tutorial above, I’m fixing a wattmeter prong which bent to the front side of the plug. I managed to fix that and the device is working perfectly fine.

1. Is it safe to perform this action?

   There is no clear answer to this question, but one discussion suggests they are doing that all the time and never encountered any issue. Just be gentle and careful when applying pressure to the prongs.

2. What if the plug breaks off?

   This rarely happens but if you broke the plug, you have to replace the plug by asking a technician. However, there are dozens of tutorials on the internet that can help. Still, help from a technician is better than figuring it out by yourself.

3. I don't have pliers, what should I do?

   Pliers are not a rare thing. There are tons of them within a few steps of your neighborhood. Ask them to borrow the pliers. You may use your fingers, but I wouldn't recommend.

So, that’s the guide to straighten any prongs. The key important factor is gentleness and a sprinkle of patience.

I hope that helps! Please let me know if you have any questions or feedback.

Is it safe to use a bent plug?

Yes, it is safe to use a bent plug as long as the metal prongs are still in contact with the wall outlet. If the plug is severely bent, however, it may not make proper contact with the outlet and could cause a fire.

How can u charge ur phone without a charger?

There are a few ways to charge your phone without a charger. One way is to use a power bank. A power bank is a device that stores energy and can be used to charge your phone or other devices. Another way to charge your phone without a charger is to use a USB cable. If you have a computer or other device with a USB port, you can use the USB cable to charge your phone. You can also use an AC adapter to charge your phone.

How do you fix a broken charger?

The best way to fix a broken charger is to take it apart and see if you can identify the problem. If you can’t fix it yourself, you can take it to a repair shop.

Why does my Android phone only charge at a certain angle?

Your Android phone likely has a specific charging angle that it needs to be in order to charge properly. This is because the phone’s battery is positioned in a certain way within the device in order to make it as thin as possible. If you try to charge your phone at an angle that is not its designated charging angle, you may not be able to get it to charge at all, or it may take longer to charge.

Why does my charger wiggle in my phone?

There are a few reasons why your charger might be wiggling in your phone. One possibility is that the contacts on the charger aren’t making good contact with the contacts on your phone. If this is the case, you can try cleaning the contacts with a soft cloth or using a toothpick to help them make better contact. Another possibility is that your phone’s charging port is dirty or damaged. In this case, you might need to have the port cleaned or replaced.

Why does my phone charger only work if I move it around?

There are a few reasons why your phone charger might only work if you move it around. One reason is that the wires inside the charger might be loose, and moving the charger around helps create a better connection between the wires and your phone. Another possibility is that there’s something blocking the charging port on your phone, and moving the charger around helps to push the blockage out of the way.

How do I stop my cords from curling?

There are a few things you can do to help keep your cords from curling. One is to wrap them around a cylindrical object, like a pen or a ruler. Another is to spray them with hairspray or water. Finally, you can try using a clothespin to hold them in place.

How do you unbend a plug without pliers?

There are a few ways to unbend a plug without pliers. One way is to use a knife. Another way is to use a hammer and a nail.

How do you fix a bent pin on a plug?

If you have a bent pin on a plug, you can try to fix it by straightening the pin with needle-nose pliers. If that doesn’t work, you can remove the pin and replace it with a new one.

Why do plug in prongs have holes?

The holes in plug-in prongs are there to allow air to flow through and cool the electrical components inside the plug.

How do you unravel a twisted cord?

There are a few ways to unravel a twisted cord. One way is to hold one end of the cord and twist the other end in the opposite direction. This will cause the cord to untwist. Another way is to use a pencil or pen to poke down the center of the cord. This will help loosen the twisted sections.