(Securitex
Roger Access Control System) The following shows the full range of Roger access control system equipment, we guarantee that this equipment has be use and deployed by Securitex in the most demanding and harsh environment like the Oil and Gas facilities and heavy industrial premises for years without any quality issue and glitch, such we highly recommended that when you are looking at cost effective system yet reliable, this is the system
that you will not regret having. Click here for stock available in
Singapore
|
- fully standalone or networked operation,
- ABS plastic case, silicone rubber keypad, RTC clock, non violate memory,
- RFID and/or PIN code identification,
- three multipurpose NO/NC inputs,
- two multipurpose 1A transistor outputs, electronically protected,
- one relay output (form C contacts, 1.5A rated),
- inputs and outputs controlled by time schedules,
- 1000 or 4000 users (depends on firmware version),
- four user types: Normal, Switcher full, Switcher limited and Master,
- card usage limit definition,
- non violate
48 000 events register,
- 127 access groups,
- 99 time schedules,
- holiday definition,
- [Door contact], [Exit button], [Forced entry], [Duress] and more function,
- Soft or Hard mode anti-passback with reset schedule,
- [Normal], [Locked],
[Unlocked] and [Conditional Unlocked] door lock modes, each under schedule control,
- [Card] or [Card+PIN] mode, both controlled by schedule,
- special entry modes ([Card+Card] and [Conditional Access]) both under schedule control,
- customer defined T&A registration modes,
- T&A registration modes controlled manually from
keypad, external line or by schedule,
- integration with IAS (Intruder Alarm System) through SWITCH output,
- Intruder Detection Input with automatic Arming/Disarming feature,
- operation with remote access terminal (PRT series reader) on 150m distance,
- firmware download mode,
- 12VDC/80mA supply,
- accepts UNIQUE (EM4001/2) cards,
- 15 cm reading range for ISO card,
- Windows 95/98/2K/NT/XP software, free for systems up to 8 doors,
- SDK (Software Development Kit) with ActiveX (OCX) control,
- comply with EN50133,
- CE mark (available Q1/2004).
General Description The PR302 controller is dedicated for use in access control systems equipped with electric door lock. It has a built-in proximity reader and 12 digit keypad. PR302 offers three inputs, one relay output and two transistor outputs, inputs and outputs can be configured to several pre-defined functions. Controller can register up to 4000 users, every user can be identify
by Card, PIN or both method at once. The reader which is integrated into controller accepts UNIQUE standard cards (EM4001/2) or compatible. Controller offers In Circuit Programming feature which enables firmware downloading into microprocessor memory. The PR302 controller can operate with one external identification terminal (reader) PRT series made by Roger (www.roger.pl). Usually an additional identification
terminal is used when both side door control is required or when controller unit must be located in protected area in order to avoid access of unauthorized person to controller electronics. PR302 can operate is standalone mode or in networked system, when running in standalone mode it records all events in its internal memory banks and offer the same functionality as in networked mode Custom Firmware On special request Roger offers custom specified versions of firmware which can be
download to controller during manufacturing process or after installation. The firmware downloading (flashing) doesn�t require any specialized programming cable, it use built-in RS485 interface (lines A and B) and requires Roger ISP program on downloading computer.
Note if you are using the Mozilla Firefox and the page does not display in full, please revert to use Internet Explorer
Technical Specification
|
|
| Operating voltage range
| 10...16 VDC (recommended linear type power supply unit)
| Current consumption
| avg. 80mA
| Tamper
| normally closed contact
| Reading range
| up to 15 cm for ISO card (depends on card quality)
| Card type
| UNIQUE standard, ASK Modulation 125kHz (EM4001/2 compatible)
| Operating temp. range
| 0...+55� C
| Cable distance to optional identification terminal
| 150 meters (500 ft)
| Cable distance between controller and CPR control panel or PC computer
| 1200 meters (4000 ft)
| Operating humidity
| 0 to 95% (non condensing)
| Ingress protection code
| IP30 (For internal use only, none water protection)
| Dimensions (mm)
| 105 X 105 X 31 mm
| Weight (grams)
| 175g
|
| Ordering Information
| PR302
| Controller with keypad. A self-adhesive cover is delivered with new controller so installer may if needed remove keypad and replace it with plastic cover.
| PR302bk
| Controller without keypad.
|
|